T3602 Dual-Zone Station with Independent A/B Control
SUGON T3602 delivers 240W of power across two completely independent zones—run T115 micro-precision alongside T210 SMD work simultaneously, each with its own temperature setting, display, and auto-sleep function.
Whether you’re operating a phone repair business, training an apprentice on a shared station, or simply tired of swapping handles mid-job, this dual-zone design doubles your capability without doubling your bench footprint. Both zones heat up rapidly and maintain temperature within ±2°C.
At a Glance
| Zone A | Zone B |
|---|---|
| Independent temperature control | Independent temperature control |
| 200°C – 450°C range | 200°C – 450°C range |
| Dedicated display | Dedicated display |
| Auto-sleep when holstered | Auto-sleep when holstered |
| T115 or T210 handle | T115 or T210 handle |
✓ 240W total power for rapid heating ✓ Both zones operate simultaneously ✓ ±2°C temperature stability ✓ ESD-safe (< 1Ω tip-to-ground, < 25mV potential) ✓ °C/°F conversion on both zones ✓ 6 cartridge tips included (T115 and T210)
Included as gift: Thermocouple calibrator + silicone work mat
Two Zones. Complete Independence.
Most dual-output stations share resources. Power to one handle affects the other. Temperature adjustments ripple across outputs. The SUGON T3602 is different.
| Feature | Zone A | Zone B |
|---|---|---|
| Temperature setting | Independent | Independent |
| Display readout | Dedicated | Dedicated |
| Auto-sleep | Triggers separately | Triggers separately |
| Power delivery | Unaffected by Zone B | Unaffected by Zone A |
Adjust Zone A without touching Zone B. Set T115 to 320°C for delicate work while T210 runs at 380°C for ground planes. Each zone maintains its settings regardless of what the other is doing.
240W Rapid Heating
Combined 240W power means both zones heat up fast and recover instantly from thermal demand. No waiting. No temperature sag when working on challenging joints.
What 240W enables:
→ Rapid heat-up on both handles simultaneously → Fast thermal recovery on large pads and ground planes → Sustained power for lead-free soldering → Smooth operation even under heavy dual-zone use
Both handles ready when you are. Both handles stay at temperature throughout your work.
Efficiency That Extends Tip Life
The T3602 uses less than 5% power to maintain 300°C at idle. This isn’t just energy efficiency—it’s tip protection.
| High Power Idle | SUGON T3602 Design |
|---|---|
| Constant high current | Minimal power at temperature |
| Accelerated tip oxidation | Reduced tip wear |
| Shorter cartridge lifespan | Extended cartridge life |
| Higher running costs | Lower consumable costs |
Careful thermal management means your cartridges last longer and perform better throughout their lifespan. The savings on replacement tips add up quickly in busy workshops.
Auto-Sleep on Both Zones
Place either handle in its holder and that zone enters sleep mode automatically. The other zone continues working unaffected.
How it works:
→ Zone A handle holstered → Zone A sleeps → Zone B unaffected → Zone B handle holstered → Zone B sleeps → Zone A unaffected → Both holstered → Both sleep independently → Lift either handle → That zone wakes in seconds
Each zone protects its own cartridge. No global sleep that interrupts your workflow. True independent operation.
ESD Protection That Exceeds Standards
Sensitive electronics demand proper ESD protection. The T3602 delivers:
| Specification | T3602 Performance | Why It Matters |
|---|---|---|
| Tip-to-ground resistance | < 1Ω DC | Proper static dissipation |
| Tip-to-ground potential | < 25mV True RMS | Safe for sensitive ICs |
These specifications exceed typical requirements for professional electronics work. Your microcontrollers, memory chips, and sensitive analog circuits stay protected on both zones.
Included: 6 Cartridge Tips
The T3602 ships ready to work with cartridges for both handle types:
T115 Cartridges (3 included):
| Tip | Shape | Best For |
|---|---|---|
| C115-I | Chisel | Drag soldering, efficient heat transfer |
| C115-IS | Small Chisel | Medium joints, tighter access |
| C115-K | Pointed | Micro-joints, flying wires, precision work |
T210 Cartridges (3 included):
| Tip | Shape | Best For |
|---|---|---|
| C210-I | Chisel | Larger SMD joints, connectors |
| C210-IS | Small Chisel | General-purpose SMD work |
| C210-K | Pointed | Fine-pitch QFP, SOIC packages |
Full coverage from micro-precision to standard SMD work—no additional purchases needed to start.
Bonus Gifts Included
Thermocouple Calibrator
Professional repair work demands accurate temperatures—not guesswork. The included thermocouple calibrator lets you:
→ Verify actual tip temperature against display reading → Calibrate both zones for precise accuracy → Check calibration periodically as tips wear → Ensure consistent results across all your work
Most workshops buy calibrators separately. This one’s included, ready to verify your T3602 performs exactly as specified.
Silicone Work Mat
A proper work surface protects your bench and your components. The included medium-sized silicone mat provides:
→ Heat-resistant surface for hot tools and components → Anti-static properties for sensitive electronics → Organisation sections for small parts and screws → Protection for your workbench from solder splashes
Set up your workspace properly from day one. No additional purchases needed.
Temperature Unit Switching
Two dedicated buttons switch between Celsius and Fahrenheit on each zone. Match your preference or follow repair guides from different regions without menu diving.
Quick, direct control. No scrolling through settings. Just press and switch.
What You Can Repair and Build
Phone Repair Workshops Zone A runs T115 for component-level micro-soldering. Zone B runs T210 for connector replacements. Handle back-to-back repairs without any tool changes.
Training and Apprenticeships Trainer and trainee work simultaneously on the same station. Independent zones mean independent learning without interference.
High-Volume SMD Rework Dedicate each zone to different temperature profiles. Switch between handles based on component requirements without waiting for temperature changes.
Mixed Precision Work Keep micro-precision ready on one zone while standard SMD capability waits on the other. Whatever the next job demands, you’re ready.
Production Line Efficiency Two operators, one station. Or one operator, two simultaneous tasks. Flexible deployment for varied workflow requirements.
Ideal For
| User | Benefit |
|---|---|
| Phone repair businesses | Two handles ready = faster turnaround |
| Professional workshops | Training capability built-in |
| High-volume repair | Zero downtime between handle types |
| Precision electronics | ESD protection exceeds standards |
±2°C Temperature Stability
Both zones maintain set temperature within ±2°C under no-load, no-airflow conditions. This precision enables:
→ Consistent joints throughout your session → Safe work on temperature-sensitive components → Reliable lead-free soldering → Repeatable results across both zones
Set your temperature, trust your reading. PID control on both zones maintains accuracy regardless of workload.
Technical Specifications
| Specification | Value |
|---|---|
| Model | SUGON T3602 |
| Power Consumption | 240W |
| Input Voltage | AC 110V / AC 220V (Universal) |
| Frequency | 50/60Hz |
| Temperature Range | 200°C – 450°C (212°F – 842°F) |
| Temperature Stability | ±2°C (no airflow, no load) |
| Tip-to-Ground Resistance | < 1Ω DC |
| Tip-to-Ground Potential | < 25mV True RMS |
| Idle Power at 300°C | < 5% of rated power |
| Zones | 2 (A/B, fully independent) |
| Compatible Handles | T115, T210 |
| Compatible Cartridges | JBC-style C115, C210 |
What’s in the Box
| Quantity | Item |
|---|---|
| 1x | SUGON T3602 dual-zone base station |
| 1x | T115 handle |
| 1x | T210 handle |
| 3x | C115 cartridges (I, IS, K tips) |
| 3x | C210 cartridges (I, IS, K tips) |
| 2x | Handle holders with sleep sensors |
| 1x | Power cable |
| 1x | User manual |
Bonus gifts included:
| Quantity | Item |
|---|---|
| 1x | Thermocouple calibrator |
| 1x | Silicone work mat (medium size) |
Cartridge Compatibility
The SUGON T3602 works with JBC-style C115 and C210 cartridges. Most third-party and genuine JBC cartridges fit without issues.
Note: The C115 system has more compatibility variations between manufacturers. Always verify cartridge type before purchasing replacements.
What Makers Are Saying
“Transformed my phone repair workflow. T115 stays hot for board-level work while T210 handles flex cables and connectors. No more waiting, no more swapping—just grab the right handle and go.”
“Training my son on the second zone while I work. Each of us has independent control, independent display, independent everything. One station doing the job of two. The included calibrator was a nice bonus—verified both zones were spot-on out of the box.”
