YIHUA 853AAA-I 3-in-1 Rework Station with Hot Air, Soldering Iron & LCD Screen Separator

Running a phone repair business with three separate tools cluttering your bench? The YIHUA 853AAA-I combines a hot air gun, 110W soldering iron, and heated LCD separator platform into one compact station. Tackle screen replacements, BGA rework, and board-level repairs without switching between equipment.

Whether you’re separating cracked iPhone screens, reflowing GPU connections on laptops, or replacing capacitors on gaming consoles, this station handles the complete workflow. PID temperature control on all three tools means consistent, reliable heat—every repair, every time.

At a Glance

✓ 1180W total power ✓ PID control on all three tools ✓ Individual controls for each function ✓ 5V USB port for device monitoring ✓ Dust cover protects heating panel

Three Tools. One Station. Complete Workflow.

Phone repair demands multiple heat sources. Screen separation needs gentle, even preheating. Component removal needs focused hot air. Board work needs a precise soldering iron. Most techs juggle three separate tools, three power cables, three sets of controls.

The YIHUA 853AAA-I consolidates everything:

Use all three simultaneously or one at a time. Individual controls let you set each tool independently. One station handles your entire repair process from screen separation to final touch-up.

LCD Screen Separator

The 200 × 110mm heated platform fits smartphones, tablets, and smartwatches. Temperature range of 50°C to 120°C softens display adhesive without damaging OLED panels or LCD assemblies.

Key Features:

→ Silicone pad protects device screens during heating → Suction function helps lift separated glass cleanly → 5V USB port powers devices during separation—monitor screen status in real time → Dust cover protects the heating panel circuitry when not in use

The low temperature range prevents thermal damage to sensitive displays. Heat the adhesive just enough to release—no scorched bezels, no damaged flex cables, no ruined OLED layers.

Perfect for:

• iPhone screen replacements
• Samsung Galaxy glass-only repairs
• iPad digitiser removal
• Smartwatch battery access
• Tablet screen separation

Hot Air Gun

The hot air station covers 100°C to 480°C with adjustable airflow from 1 to 99. The brushless blower delivers smooth, consistent air without the turbulence that scatters tiny components.

Standby Mode: Place the gun in the holder and temperature automatically drops below 100°C. Pick it up and heat returns to your set temperature. This extends heating element life while keeping you ready to work—no waiting for full heat-up cycles between tasks.

What You Can Rework:

→ BGA chips and GPU packages → Shield cans and RF covers → QFN and QFP components → Charge port connectors → Audio and power ICs

The ≤120 L/min maximum airflow handles everything from delicate 0402 components (low flow) to stubborn BGA packages (high flow). Dial in the right combination of heat and air for each job.

110W Soldering Iron

The soldering station delivers 200°C to 480°C with serious 110W power. PID control maintains your set temperature even when working on ground planes and thermal pads that sink heat away from your tip.

Protection Features:

The automatic shutdown prevents leaving the station on unattended. Essential for busy repair shops where you might step away between jobs.

PID Control on Every Tool

All three tools use PID temperature regulation. The station monitors heat continuously and corrects within ±1-2°C.

Why this matters:

→ LCD separator maintains even heat across the entire platform—no hot spots → Hot air gun delivers consistent temperature throughout reflow → Soldering iron holds steady even on demanding joints

Set your temperature, trust your reading. No guessing, no thermal surprises, no damaged components from unexpected heat spikes.

What You Can Repair

Phone Repairs Separate cracked screens with the heated platform. Remove charge port connectors with hot air. Replace audio ICs and power management chips with the soldering iron. Complete workflow without switching stations.

Tablet and iPad Work The 200 × 110mm separator platform handles larger devices. Soften adhesive on iPad digitisers. Access batteries on tablets. Rework logic boards after separation.

Laptop Motherboard Repairs Reflow GPU connections. Replace failed capacitors. Remove and reball BGA chips. The 1180W total power handles demanding laptop rework.

Gaming Console Repairs Replace HDMI ports on PlayStation and Xbox. Reflow APU connections. Remove shield cans for board access. Swap failed capacitors.

Smartwatch Repairs The silicone pad protects small watch screens during heating. Access batteries and displays on Apple Watch, Samsung Galaxy Watch, and similar devices.

Smart Protection Built In

Over-Temperature Protection Shuts down if tools exceed safe operating limits.

Short-Circuit Detection Protects the station and your work from electrical faults.

Overload Protection Prevents damage from power surges or excessive demand.

Auto-Sleep and Shutdown 10-minute sleep mode → 30-minute auto shutdown sequence keeps your workshop safe.

Individual Controls

Each tool has its own control interface—buttons and knobs for independent adjustment. Change hot air temperature without affecting your soldering iron setting. Adjust the separator platform while the other tools maintain their parameters.

This independence matters during complex repairs. Set up each tool for its specific task, then move through your workflow without constant readjustment.

Technical Specifications

Hot Air Station

Soldering Station

LCD Screen Separator

What’s in the Box

What Repair Techs Are Saying

“Replaced three separate tools with this one station. Screen separations, board rework, and soldering all from one unit. My bench has never been this organised and my workflow is so much faster.”