Tired of juggling a soldering iron in one hand and a spring-loaded solder sucker in the other? The YIHUA 929D-V combines both functions in one tool—heat the joint, tilt to activate the vacuum, and solder disappears. One-handed desoldering that actually works.
Whether you’re removing through-hole components from vintage computers, correcting mistakes on your Arduino projects, or salvaging parts from donor boards, this tool eliminates the awkward dance of coordinating separate heating and suction tools. Heat and extract in a single motion.
At a Glance
| Desoldering | Convenience |
|---|---|
| Built-in vacuum pump | One-handed operation |
| φ1.0mm and φ1.2mm tips included | Tilt-activated suction |
| Durable nylon nozzles | 3-minute preheat time |
| Anti-clog design | Ergonomic anti-skid handle |
✓ Dual function: soldering and desoldering ✓ Direct plug-in—no station required ✓ Easy nozzle replacement ✓ Cleaning needle included ✓ Spare gaskets for long-term performance
One-Handed Desoldering
Traditional desoldering requires coordination. Heat with your iron. Grab the solder sucker. Position it. Trigger it. Hope the solder is still molten. Miss the window and start over.
The YIHUA 929D-V changes everything:
| Traditional Method | YIHUA 929D-V |
|---|---|
| Two tools required | One tool does both |
| Two-handed operation | One-handed operation |
| Timing-critical coordination | Heat and extract together |
| Solder cools between tools | Solder stays molten during extraction |
| Spring-loaded triggers | Simple tilt activation |
Heat → Tilt → Done.
The vacuum button activates with a simple tilt motion. Solder flows into the nozzle while heat keeps the joint molten. No timing pressure. No coordination fumbles. Clean extraction every time.
How It Works
- Preheat the tool for 3 minutes
- Position the heated nozzle on the solder joint
- Wait for solder to melt (2-3 seconds)
- Tilt to activate vacuum suction
- Lift with the joint cleared
The integrated design means the heating element and vacuum nozzle work as one unit. Heat transfers directly to the solder while suction stands ready. No repositioning between heating and extraction.
Dual Functionality
The YIHUA 929D-V works as both a desoldering tool and a standard soldering iron. Switch between tasks without changing tools.
Desoldering mode: → Remove through-hole components → Clear clogged vias → Extract solder from pads → Clean up bridges and shorts
Soldering mode: → Install replacement components → Touch up connections → Add solder to joints → Complete repairs after extraction
One tool handles the complete rework cycle. Remove the old component, clean the pads, install the replacement—all without setting anything down.
Interchangeable Desoldering Tips
Different joints need different nozzle sizes. The YIHUA 929D-V includes two tip diameters:
| Tip Size | Best For |
|---|---|
| φ1.0mm | Standard component leads, resistors, small capacitors |
| φ1.2mm | Larger leads, connector pins, chunky vintage components |
Match nozzle size to lead diameter for optimal vacuum seal and clean extraction. Properly sized tips prevent clogging and ensure complete solder removal.
Durable nylon construction withstands repeated heating cycles. Replace nozzles when cooled for continued performance—no special tools required.
What You Can Desolder
Through-Hole Components Remove resistors, capacitors, transistors, and diodes from PCBs. The one-handed operation makes working through rows of components fast and efficient.
DIP IC Sockets Extract DIP chips and sockets from vintage computer boards. Clear each pin systematically without the coordination challenge of separate tools.
Connector Pins Remove headers, pin strips, and connectors. The larger φ1.2mm tip handles chunky connector pins effectively.
Vintage Electronics Service classic computers, arcade boards, and retro consoles. The gentle extraction protects aged PCBs from pad damage.
Mistake Correction Wrong component in the wrong place? Extract it cleanly and try again. Essential for learning and prototyping.
Component Salvage Recover valuable parts from donor boards. Build your inventory with cleanly extracted components ready for reuse.
Ergonomic Design
Extended desoldering sessions demand comfortable tools. The YIHUA 929D-V features:
| Feature | Benefit |
|---|---|
| High-grade ABS construction | Durable, heat-resistant housing |
| Anti-skid handle | Secure grip even with warm hands |
| Balanced weight | Natural feel during one-handed use |
| Intuitive tilt activation | No awkward button reaching |
Work through entire boards without hand fatigue. The ergonomic shape supports natural wrist position throughout your session.
Quick Setup
No station required. No control box to position. Just plug in and wait 3 minutes for preheat.
Direct plug-in operation means you’re working quickly:
→ Plug into mains power → Wait 3 minutes for operating temperature → Start desoldering
Perfect for occasional desoldering tasks where setting up a full station isn’t justified. Grab it, heat it, use it, put it away.
Easy Maintenance
Desoldering tools collect solder debris. The YIHUA 929D-V makes maintenance straightforward:
Cleaning needle included Clear any blockages from the nozzle pathway. Regular cleaning maintains suction performance.
Replaceable nozzles When nozzles wear, swap them easily once cooled. No special tools required.
Built-in spare gaskets Two additional gaskets included to maintain optimal suction power over time. Gaskets wear with use—having spares ready extends tool life without hunting for parts.
Safety Features
Durable nylon nozzles resist heat while protecting your work surface and components from metal-to-metal contact.
3-minute preheat indicator ensures the tool reaches proper operating temperature before use. Working with an underheated tool leads to incomplete solder melting and frustrating extraction attempts.
Technical Specifications
| Specification | Value |
|---|---|
| Function | Desoldering pump + soldering iron |
| Operation | One-handed tilt activation |
| Preheat Time | 3 minutes |
| Desoldering Tips | φ1.0mm and φ1.2mm included |
| Nozzle Material | Durable nylon |
| Handle Material | High-grade ABS |
| Input Voltage | 220V AC |
What’s in the Box
| Quantity | Item |
|---|---|
| 1x | YIHUA 929D-V desoldering iron |
| 1x | φ1.0mm desoldering nozzle |
| 1x | φ1.2mm desoldering nozzle |
| 1x | Cleaning needle |
| 2x | Spare gaskets |
| 1x | User manual |
Everything included to start desoldering immediately—plus maintenance supplies for long-term performance.
12-Month UK Warranty
Every YIHUA 929D-V is backed by our comprehensive 12-month guarantee. Manufacturing defect or material issue within this period? We repair or replace it at no extra cost.
This warranty reflects our confidence in YIHUA’s build quality and our commitment to your satisfaction.
What Makers Are Saying
“Game changer for through-hole rework. I used to dread desoldering DIP chips—now I can clear a 40-pin socket without the frustration of coordinating two tools. The tilt activation feels natural after a few joints.”
“Bought this for recapping old computers. One-handed operation means I can hold the board steady while extracting solder. So much faster than my old spring-loaded sucker that never seemed to trigger at the right moment.”
