Soldering Station with PID Temperature Control
Ready to upgrade from that basic iron with no temperature feedback? The YIHUA 926LED-IV delivers professional-grade PID control in a compact all-in-one design that won’t take over your workbench.
Whether you’re assembling your first Arduino shield, replacing capacitors on a vintage Game Boy, or building custom mechanical keyboards, this station gives you the temperature accuracy that makes clean joints easy. Dual LED displays show exactly what’s happening—no more guessing if your iron is actually at the temperature you set.
Key Benefits
- PID temperature control maintains heat within ±1-2°C
- Rapid heat-up from room temperature to working range in seconds
- Dual LED displays show set temperature and real-time tip temperature
- Three memory presets for quick temperature switching
- Built-in iron stand, tip storage panel, and helping-hands mount points
- ESD-safe construction with less than 2Ω tip-to-ground resistance
- Sleep and standby modes extend tip life
- Compact 15 × 15 × 12.2cm footprint
- Temperature range from 90°C to 480°C
Why PID Control Makes Better Joints Basic soldering irons use simple on-off heating. Temperature swings up and down as the heater cycles. You set 350°C but actual tip temperature might fluctuate between 320°C and 380°C.
The YIHUA 926LED-IV uses PID control instead. The system continuously monitors tip temperature and adjusts power in real time. Set 350°C, get 350°C—consistently, throughout your soldering session.
This precision matters for lead-free solder work where temperature windows are tighter. It matters for delicate SMD components that can’t tolerate thermal shock. And it matters for clean, shiny joints that flow properly every time.
Dual LED Displays End the Guesswork Two separate displays show your set temperature and actual tip temperature simultaneously. Watch the real-time reading climb during heat-up. Verify your tip holds steady under load. Spot any drift immediately.
This feedback changes how you work. You’ll know instantly if a large ground plane is pulling heat from your tip. You’ll see exactly when the iron recovers to working temperature. No more failed joints from working blind.
Three Memory Presets Save Time Store your preferred temperatures and recall them with a single turn of the knob. No scrolling through menus or holding buttons.
Set preset one for leaded solder at 320°C. Use preset two for lead-free work at 365°C. Keep preset three at 380°C for stubborn ground plane connections. Switch between tasks in seconds.
All-In-One Design Saves Bench Space The YIHUA 926LED-IV integrates everything into one compact unit. The built-in iron stand keeps your hot tool secure. The tip storage panel organises spare tips within reach. Helping-hands mount points let you attach holders directly to the station.
At just 15 × 15 × 12.2cm and 1.04kg, this station fits on crowded desks and small workbenches. One power cord, one unit, everything you need ready to work.
What You Can Repair and Build The YIHUA 926LED-IV handles the projects that matter to electronics enthusiasts.
Maker projects: Build Arduino and ESP32 circuits with consistent heat. Assemble LED strip controllers. Prototype custom PCBs with clean, reliable joints.
Console repairs: Fix joystick drift on PlayStation and Xbox controllers. Replace buttons and triggers. Repair headphone jacks and charging ports.
Retro restoration: Install Game Boy backlights. Replace capacitors on vintage computers and consoles. Restore classic gaming hardware to working condition.
Custom keyboards: Solder switches with precision temperature control. Install hot-swap sockets. Assemble split keyboard PCBs with consistent results.
Phone and tablet work: Swap charging ports. Replace battery connectors. Work on through-hole and larger SMD components with confidence.
ESD-Safe for Sensitive Components Static discharge can destroy modern ICs invisibly. The YIHUA 926LED-IV includes proper ESD protection with less than 2Ω resistance from tip to ground.
This protection matters when you’re working on CMOS chips, memory components, and microcontrollers. Your sensitive electronics stay safe from electrical damage.
Sleep Mode Protects Your Tips Leave the iron idle and the station automatically enters sleep mode. Lower standby temperature reduces oxidation, extending tip life and saving you money on replacements.
Pick up the iron and working temperature returns quickly. No waiting for full heat-up cycles between tasks.
130W Maximum Power When You Need It The station runs at 18W for normal operation but delivers up to 130W maximum when rapid heating is needed. Cold start to working temperature takes just seconds. Thermal recovery after touching large pads happens almost instantly.
This reserve power means the iron keeps up with your work pace instead of making you wait.
Care Instructions Wipe the tip on the supplied sponge after each use to remove oxidation and flux residue. Tin tips with fresh solder before storage to prevent corrosion. Keep ventilation clear for proper cooling. Power off when idle for extended periods.
Technical Specifications
| Specification | Value |
|---|---|
| Rated Power | 18W (130W Max) |
| Input Voltage | 220V AC |
| Temperature Range | 90°C – 480°C |
| Temperature Control | PID (±1-2°C) |
| Memory Presets | 3 |
| ESD Protection | < 2Ω tip-to-ground |
| Display | Dual LED (Set/Real temperature) |
| Dimensions | 15 × 15 × 12.2cm |
| Weight | 1.04kg |
What’s in the Box
- YIHUA 926LED-IV main station with built-in stand
- Soldering iron with handle
- Cleaning sponge
- Power cord and user manual
What Makers Are Saying “My first proper soldering station after years with a cheap iron. The dual temperature displays are brilliant—I can actually see what’s happening instead of guessing. My joints look so much better now.”
“Perfect size for my small desk setup. The built-in stand and tip storage keep everything organised. Three presets mean I’m not fiddling with settings when I switch between projects.”
